 |
High Pressure Spool Valve for
Thick Materials to produce small to large shots or continuous beads,
these
high-pressure
dispense valves are an economical choice to dispense high viscosity
materials such as silicones, RTV's, sealants and greases.
Spool Valves provide
a snap-release shut off after dispensing, resulting in a suck-back at the
fluid outlet, preventing drips. Order in aluminum or
stainless steel. For a typical valve
setup, click here.
|
|
In this Category:
Valve Finder
Valve Controller
Auger Valve
Encoded Auger
Auger Controller
Front Closing Valves
Metering Valves
Non Contact Valve
Diaphragm Valves
Spray Valve
Pinch Tube Valve
Spool Valve
Other Valves
Twin Valve
Valve Accessories
Other Valves
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
|
|
These are "on/off" segmented high-pressure
spool valves. Applying a minimum of 50 PSI to the air inlet will
force the spool forward (under pressure from the internal tension
spring) dispensing the material.
Releasing
the air pressure results in the internal spring snapping back into
position and closing the valve.
The minimum shot size for this range of valves is approximately
.12cc/ml.
To feed any IDS valve, choose from our
dispensing syringes, (to feed thin to medium
materials in very small shots) our
single cartridges, (for medium to thicker materials in smaller shots
or beads) or for large volume capacity, order one of our
reservoirs (for thin to medium
materials) or one of our pail
dispenser units, for thicker materials.
Features
-
High-pressure fluid input up to
2500 PSI
-
Suitable for very high
viscosity fluids
-
Replaceable seals
Specifications
-
5100781: aluminum valve body
-
5100782: stainless steel valve body
-
Aluminum material: inlet & outlet blocks
-
Material inlet: 1/4 NPT
-
Air inlet (actuating): 1/4 NPT
-
Air pressure required:
50 PSI minimum
-
Material outlet: 1/4 NPT
-
Maximum input pressure: 2500 PSI
-
Seals: O-ring - Viton, seats are glass filled
Teflon
Order
5100781
High Pressure Spool Valve - Aluminum
5100782 High
Pressure Spool Valve -
Stainless Steel
5100680
Spool Valve Repair Kit with Valve Spool
5100681
Spool Valve Repair Kit without Valve Spool
5101273
Spool Valve Accessory Kit
5900011VCR
Valve Controller High Volume 110V
5900011VCRE
Valve Controller High Volume
CE 230V
5100312
Aluminum Spool Valve Stand
5100313
Stainless Steel Spool Valve Stand
|
|
